How to Add Your Camera via Ethernet Cable

Quick Setup Overview

• Connect the Power Supply
• Enter pairing mode
• Connect the Ethernet cable
• Add device in the App
• Complete final configuration

Connection Methods

Before proceeding with setup, please note that there are two ways to add your device by using a wired connection:

• Ethernet Cable Connection (Recommended)
  Provides the most stable and reliable setup via a direct network cable connection.
• QR Code Binding (Backup)
  Used when the device isn’t found automatically during scanning or pairing fails.

Step-by-Step Instructions

1. Connect the Power Supply

• Connect the power cable and charging adapter to the device.
• The device will power on automatically.

2. Enter Pairing Mode

2.1 First-Time Pairing

• When powered on for the first time, the camera automatically enters pairing mode.
• You’ll hear “Ding Dong Ding Dong”, indicating it’s ready to be added in the app.

2.2 Re-Pairing (Previously Connected Device)

If the camera was previously paired, it won’t enter pairing mode automatically. To activate pairing mode manually:

• Hold the Reset button for 5–10 seconds.
• When pairing mode starts, you’ll hear “Ding Dong Ding Dong”.

3. Connect the Ethernet Cable

• Plug one end of the Ethernet cable into the device.
• Connect the other end to your router or network switch.
• Ensure the cable is properly connected and the router has internet access.

4. Add Device in the App

4.1 Open the App

• If this is your first time adding a device, tap “Add Camera Now” on the home screen.
• If you’ve added devices before, tap the “+” icon in the upper-right corner and choose “Add a new device.”

4.2 Detect and Connect

Once the device is powered and connected:

• If the app finds your device, a “New device found” badge will appear next to the camera icon.
  • Tap it to view the device model and serial number (SN).
  • If correct, tap to proceed to the “Connecting...” screen.
• If no notification appears:
  • Wait until you hear the startup sound.
  • Tap “I heard the sound” → “Next Step”.
  • On the “Choose your device” page, select your camera model.
  • You will be directed to the “Connecting...” screen.

4.3 Use QR Code as Backup

If your device still isn’t listed:

• Tap “Other connection methods.”
• On the “Choose a device connection method” screen, select “Connect via Ethernet cable.”
• On the “Connect the Ethernet cable” screen, tap “Make sure the Ethernet cable is connected”, then tap “Next Step.”
• A QR code will appear — scan it with your camera to complete pairing.

Final Configuration

• After the camera connects successfully, it will automatically jump to “Set a name and location for the device”
  • Enter a name and choose a location, then tap “Next Step”

You’ll see “Device added successfully”, then:

• If you need to add more cameras, tap “Add another device” to repeat the setup process.
• If you tap “Let’s start” to go through the installation guide, the app will check signal quality:
  • If signal is good, tap “Next Step”
  • Follow each step of the on-screen installation guidance
  • Tap “Finish” to complete setup

You’ll then return to the Home screen, and the device is ready to use.