Battery performance depends on usage habits and environmental conditions. Below are the most common factors that reduce battery life, along with recommended solutions.
Frequent Motion Triggers
Cause: The PIR sensor detects changes such as moving objects, shifting light, hot or cold air, or swaying trees, which can cause unnecessary recordings.
Solutions:
- Adjust the camera’s position to avoid trees, direct sunlight, or reflective surfaces.
- Set motion detection sensitivity to Low or Medium.
- Enable Cool Down Time to prevent repeated recordings within short intervals.
Extended Live Streaming
Cause: Keeping the live stream open consumes continuous power.
Solution: Use live view only when necessary to conserve battery life.
Poor Wi-Fi Connection
Cause: A weak or unstable signal forces the camera to repeatedly search for a network, draining the battery. Thick walls, bricks, metal objects, or water can interfere with Wi-Fi signals.
Solutions:
- Place the camera closer to the Wi-Fi router.
- Use a stronger router or a Wi-Fi extender.
- Minimize obstructions between the camera and the router.
Extreme Temperatures
Cause: Both very low and very high temperatures can reduce battery performance.
- Operating Temperature: -10°C to 45°C (14°F to 113°F)
- Charging Temperature: 0°C to 45°C (32°F to 113°F)
Solutions:
- Avoid using or charging the camera outside the recommended temperature ranges.
- If exposed to extreme heat or cold, allow the camera to return to normal temperature before use or charging.
Night Vision
Cause: When Night Vision is enabled, infrared LEDs activate in low light, increasing power consumption.
Solutions:
- Adjust “Light sensitivity level” in Video Settings to Low or Medium, so the camera does not enter night mode too early.
- Use Night Vision only when necessary.
Recording Settings
Cause: Longer recording duration and higher resolution require more battery.
Solutions:
- Set recording duration to 10 seconds.
- Choose SD resolution instead of HD.
- Schedule non-working hours with the Sleep feature to pause motion detection, notifications, and alarms, which significantly extends battery life.
Battery Health
Cause: Improper charging habits or long storage without maintenance reduce battery performance over time.
Solutions:
- Use a 5V/1.5A charger to ensure stable charging.
- Avoid letting the battery completely drain before recharging.
- If storing the camera for a long time, keep the charge between 40%–60%.
Using a Solar Panel
Cause: Frequent charging may be inconvenient for outdoor installations.
Solution: Connect the camera to a compatible solar panel. With sufficient sunlight, the solar panel can continuously maintain the battery level and reduce the need for manual recharging.
Typical Battery Performance
Under standard conditions (SD resolution, stable Wi-Fi), a fully charged battery can support approximately:
- 5,000 mAh / 5,200 mAh: 3,000–3,500 clips (10 seconds each)
- 6,700 mAh: 4,000–4,500 clips (10 seconds each)
- 9,000 mAh: 6,000–7,000 clips (10 seconds each)
For example, if the camera records 20 clips per day, the battery may last:
- 2–5 months (5,000–5,200 mAh)
- 2–6 months (6,700 mAh)
- 3–8 months (9,000 mAh)
Actual performance varies depending on environmental conditions and usage patterns.