Applies to: Wi-Fi and 4G Cameras
A weak or unstable network signal, whether through Wi-Fi or 4G cellular, can significantly impact your camera’s battery performance. When the camera cannot maintain a stable connection, it may repeatedly attempt to reconnect, leading to faster battery drain and shorter operational time between charges.
This article explains why poor network signal causes excessive power consumption and what steps you can take to optimize your camera's battery life.
Why Weak Network Signal Affects Battery Life
- Frequent reconnection attempts
When signal is unstable, the camera actively scans and tries to reconnect, which increases power usage. - Online/offline cycling
Each time the camera disconnects from the network and reconnects, it draws more energy than during normal standby or operation. - Disrupted communication with servers
An unstable network forces the camera to repeatedly attempt uploading recordings or syncing data, leading to unnecessary battery drain.
How to Improve Battery Life
- Strengthen Network Signal
- For Wi-Fi cameras:
- Place the camera closer to your router.
- Avoid interference from walls, bricks, tile surfaces, large metal objects, and water tanks.
- Use a Wi-Fi extender or mesh system if needed.
- For 4G cameras:
- Ensure your SIM card is active and has good signal coverage at the installation location.
- Avoid installing the camera in areas with known cellular dead zones or high network congestion.
- For Wi-Fi cameras:
- Optimize Network Environment
- Limit the number of devices connected to the same network (especially for Wi-Fi) to avoid bandwidth competition.
- Adjust Camera Settings for Power Efficiency
- Set motion detection sensitivity to Low.
- Limit video recording duration to 10–15 seconds when possible.
- Use scheduled sleep mode during hours when monitoring is not needed.
- Lower live view resolution to SD to reduce data transfer and power use.